The Model SCON - 300 is DIN size, 4 digit DC panel meter with isolated analog output and 4 Alarm outputs. Automatic calculation Display range , ZERO & SPAN of input. ORDERING INFORMATION Specify code number and variables @ Code number : SCON - Model - Input, Output, Power (e.g. SCON- 300 - RNX) @ Special input, outputs range : CODE, Display range, Input range (e.g. SCON -300 - DNX, 0-9999, 4-20 mA) http://www.sinwooscon.co.kr INDICATOR GENERAL SPECIFICATIONS PERFORMANCE Accuracy : 0.1 % of FS Temp. coefficient : 0.01% of FS + 0.1 digit / C Insulation resistance : 100Mohm or more with 500VDC Dielectric strength : AC 1500V at 1 Minute (input to power) Construction : panel flush mounting Connection : screw terminals Housing material : Plastic(resin) light-gray Input configuration : Differential Input Scaling : Functional switches at the front panel DISPLAY LED : 0.6 inch or 1 inch 7-segment, red or green Number of display digits : 4 (-9999 ~ 9999) Decimal point position : 3 positions selected by a programmed functional switches at the front panel Set-point adjustments : front-accessed programmed functional switches Hysteresis (dead-band) : 0.1 ~ 2.0 % of FS by programmed functional switches Over-range indication : display "OVEr" Engineering unit indication : sticker attached Burn Out : Selectable Up-Scale or Down-Scale INSTALLATIONS Power supply : AC 110V / 220V 60Hz DC 24V 10%, 5VA Operating temperature : 0 to 55 C (32 to 131 F) Operating humidity : 20 - 80% RH(non-condensing) Mounting : panel flush mounting Size : W96 x H48 x D118 mm (3.78" x 1.89" x 4.65") INPUT & OUTPUTS INPUT DC voltage : 0 ~ 300VDC minimum span : 10mV DC current : resister incorporated PAC & RTD DC voltage Input Impedance DC current Input Resistance 0 - 10 mV 0 - 100 mV 0 - 10 V > 12 V 10 KOhm or more 100 KOhm or more 1 MOhm or more 2.5 KOhm / V 4 - 20 mA 10 - 50 mA 0 - 1 mA 250 Ohm 100 Ohm 1000 Ohm PMC Input :100~100Kohm RTD Input:: -200~+600'C
S-CON200 : Indicator(DC, RTD,Other -> Alarm,Analog)
Indicator
The Model SCON - 200 is DIN size, 4 digit DC panel meter with isolated analog output and 4 Alarm outputs. Automatic calculation Display range , ZERO & SPAN of input.
MODEL
S-CON200-(in)(out)(power)
-(input) D : DC Signal input (mV, V, mA) I : Current loop supply (isolated) R : RTD (Pt 100ohm) Input T : Thermocouple Input P : Potentiometer Input O : Other Spec. Input
(output) 1 : Alarm output 2 (High & Low) 2 : Alarm output 4 (H.High, High, Low, L.Low) 3 : Analog output with 2 Alarms (SPDT) 4 : Analog output with 4 Alarms (SPST) 5 : Analog Output only N : No output
(power) X : AC 110V / 220V, 50/60YHz Y : DC 24V S-CON100 : Indicator (DC,RTD,Other -> Display)
S-CON 300 : Indicator (DC Output)
Indicator
The Model S-CON 300 is DIN size, 4 digits DC panel meter with isolated analog output, Automatic calculation of display range, ZERO & SPAN of input.
MODEL
S-CON300 -(in)(out)(power)
-(input) D : DC Signal input(mV,V,mA) I : Current looped supply (Isolated) R : RTD(Pt100 Ohm) Input P : Potentiometer Input O : Other Spec. Input
(output)
5 : No Alarm, Analog output
(power) X : AC 110V/220V 50/60Hz 10% Y : DC 24V Z : Other Specification
|