 |
|
商品名称：GSTH-1420 GSTH-1100 GRTHO-1420 GRTHO-1420Pt100 |
|
商品品牌
：ginice吉事 |
订购电话 ：0760-88886370 88886371 88886372 88886373 88732779 |
| 传真热线：0760-88306579
|
： 1分 |
| 浏览次数： 3264 |
剩余数量： 100 件 |
本站价
：￥1.00 |
优惠价
：￥1.00 |
|
|
|
|
|
|
|
| 详细信息 |
优惠信息 |
配送信息 |
售后服务 |
|
| |
|
|
|
|
GSTH-1420 GSTH-1100 GRTHO-1420 GRTHO-1420Pt100 GRTHO-1420Pt1000 GRTHO-1420N3K室内用温湿度变送器 ROOM TEMP./HUMI. TRANSMITTER
| ROOM TEMP./HUMI. TRANSMITTER(GSTH-1420) |
|
 |
"GSTH" Room Temperature Humidity Transmitter is intended for ventilation and air-handling units to detect Room temperature and relative humidity.
Especially, This unit is very suitable for use in pulp/textile/food warehouse, greenhouse, computer room, R&D room, indoor swimming pool, hospital, etc. |
 |
 This unit can be used with all system equipments that can receive output signals 4-20mA DC of the detector. |
 |
Relative Humidity
1) This Transmitter senses relative humidity by chargeable humidity sensing element which varies electrical capacity depending on circumstantial relative humidity.
2) Electronic sensing circuit varies signal into 4 ~ 20mA DC ( within 0 ~ 100% relative humidity )
Temperature
This Transmitter senses temperature by sensing element of PT1000Ω which varies electrical resistance depending on sensing temperature. |
 |
|
SUPPLY VOLTAGE : 24V AC ± 20%
FREQUENCY : 50 or 60Hz
POWER CONSUMPTION : below 1VA
SENSING RANGE : -10 ~ +70℃ / 0 ~100%RH
HUMIDITY ELEMENT : Integrated Circuity
ACCURACY ( at 20°C ) : at 20~90% Rh, ±3%Rh
OUTPUT SIGNAL : Pt100(Pt1000Ω) / 4 ~ 20mADC
SENSING TIME : About 20sec
AMBIENT TEMPERATURE : 1) On operation : -10 ~ +70℃
2) On storage & Transportation : -25 ~ +65°C
AMBIENT HUMIDITY : 1) On operation : below 95%Rh
WIRING : 2and 3wires, 1.0m㎡
WEIGHT : 0.06Kg
HOUSING : plastic case
PROTECTION CLASS : IP30 |
 |
Engineering
1) In case of control : Preferably install on the wall of building or house and keep away from direct light, |
 |
Select a location approx 1.5M above the floor for the sensor which is representative of the space to be controlled and where it will be readily affected by changing in the general space temperature & humidity level.
The sensor location should also be reasonably clean and free damp and condensation. |
| ROOM TEMP./HUMI. TRANSMITTER(GSTH-1100) |
|
|
|
| ROOM TEMP./HUMI. TRANSMITTER(GRTHO-1420Pt1000) |
|
|
| GRTHO” Room Temperature & Humidity Transmitter is intended for control transmitter by sensing relative humidity and temperature of room ventilation and air-handling units. Also can be used interface detect transmitter with sensing value display or auto control system of building |
|
Pulp/Textile/Food warehouse, greenhouse, computer room, R&D room, Hospital, etc.
Use as measuring Transmitter : In case of optimistic function system. |
|
SUPPLY VOLTAGE : DC 15~30V
OUTPUT SIGNAL : Temperature / Pt1000Ω, Humidity / 4 ~ 20mA
SENSING RANGE : Temperature / -10 ~ +70°C , Humidity / 0 ~ 100%RH
SENSING ELEMENT : Integrated Circuity, PT1000
TEMPERATURE CO-EFFICIENT : 0.00385 OHMS
SELF-GENERATING CURRENT : below 2mA ( 0.02 OHM / 0.05 Deg.)
ACCURACY : at 25°C within ±0.3°C / ±3% RH at 10 ~ 90%RH
WIRING : 4 Wire
SENSING TIME : within 1 minute apprx.
AMBIENT TEMPERATURE
1) On Operation : -10 ~ +70°C
2) On Transportation & storage : -15 ~ +50°C
AMBIENT HUMIDITY
1) On Operation : below 95%Rh
PROTECTION CLASS ENCLOSURE : IP30 (EN60529)
WEIGHT : 0.10 Kg |
|
Engineering
In case of control : Preferably install on the wall of house or building, and keep away from direct light. |
|
1) Installation height : Preferably install in the middle of house, building or heating area.
and to be installed at least 1.5 meter above from the floor.
2) Prohibited Location : Window, door, Ventilation hole, upper place of heat source, and Veranda, or beneath the eaves of roof
3) To prevent any detecting error from convection of warm air, cable wire tube of transmitter should be shielded, and must not be painted. | |
| ROOM TEMP./HUMI. TRANSMITTER(GRTHO-1420N3K) |
|
|
| “ GRTHO” Room Temperature & Humidity Transmitter is intended for control transmitter by sensing relative humidity and temperature of room ventilation and air-handling units. Also can be used interface detect transmitter with sensing value display or auto control system of building. |
|
Pulp/Textile/Food warehouse, greenhouse, computer room, R&D room, Hospital, etc.
Use as measuring Transmitter : In case of optimistic function system . |
|
SUPPLY VOLTAGE : 15~30VDC
OUTPUT SIGNAL : Temperature / NTC 3KΩ, Humidity / 4 ~ 20mA
SENSING RANGE : Temperature / -10 ~ +70°C , Humidity / 0 ~ 100%RH
SENSING ELEMENT : Integrated Circuity, NTC Ω
SELF-GENERATING CURRENT : below 2mA
ACCURACY : at 20°C within ±3%RH ( humidity )
WIRING : 4 Wire
SENSING TIME : within 1 minute apprx.
AMBIENT TEMPERATURE
1) On Operation : -10 ~ +70°C
2) On Transportation & storage : -15 ~ +60°C
AMBIENT HUMIDITY
1) On Operation : below 100%Rh
2) On Transportation & storage : below 95%Rh
PROTECTION CLASS : IP30 (EN60529)
WEIGHT : 0.10 Kg |
|
Engineering
In case of control : Preferably install on the wall of house or building, and keep away from direct light. |
|
1) Installation height : Preferably install in the middle of house, building or heating area.
and to be installed at least 1.5 meter above from the floor.
2) Prohibited Location : Window, door, Ventilation hole, upper place of heat source, and Veranda, or beneath the eaves of roof
3) To prevent any detecting error from convection of warm air, cable wire tube of transmitter should be shielded, and must not be painted | |
| ROOM TEMP./HUMI. TRANSMITTER(GRTHO-1420) |
|
| ROOM TEMP./HUMI. TRANSMITTER(GRTHO-1420Pt100) |
|
|
"GRTHO” Room Temperature & Humidity Transmitter is intended for control transmitter by sensing relative humidity and temperature of room ventilation and air-handling units.
Also can be used interface detect transmitter with sensing value display or auto control system of building. |
|
Pulp/Textile/Food warehouse, greenhouse, computer room, R&D room, Hospital, etc.
Use as measuring Transmitter : In case of optimistic function system |
|
SUPPLY VOLTAGE : DC 15~30V +20%
OUTPUT SIGNAL : Temperature / Pt100Ω, Humidity / 4 ~ 20mA
SENSING RANGE : Temperature / -10 ~ +70°C , Humidity / 0 ~ 100%RH
SENSING ELEMENT : Integrated Circuity, PT100
TEMPERATURE CO-EFFICIENT : 0.00385 OHMS
SELF-GENERATING CURRENT : below 2mA
ACCURACY : at 25°C within ±0.3°C / ±3% RH at 10-90%RH
WIRING : 4 Wire
SENSING TIME : within 1 minute apprx
AMBIENT TEMPERATURE
1) On Operation : -10 ~ +70°C
2) On Transportation & storage : -15 ~ +50°C
AMBIENT HUMIDITY
1) On Operation : below 95%Rh
PROTECTION CLASS : IP30 (EN60529)
WEIGHT : 0.10 Kg |
|
Engineering
1) In case of control : Preferably install on the wall of house or building, and keep away from direct light. |
|
1) Installation height : Preferably install in the middle of house, building or heating area.
and to be installed at least 1.5 meter above from the floor.
2) Prohibited Location : Window, door, Ventilation hole, upper place of heat source, and Veranda, or beneath the eaves of roof
3) To prevent any detecting error from convection of warm air, cable wire tube of transmitter should be shielded, and must not be painted. | |
|
|
“ GOTHO “ Outside Air temperature & Humidity Transmitter is intended for controlling Sensor by detecting relative humidity and temperature of outside air for ventilation and air-handling units. This unit can also be used as Interface detector used with display
of sensing value or Auto control system of building |
|
|
|
Pulp/Textile warehouse, Greenhouse, Computer room, R&D room, Hospital, etc.
Use measuring detector : In case of Optimistic function system |
|
|
 SUPPLY VOLTAGE
|
: 15 ~ 30V DC |
|
|
OUTPUT SIGNAL |
: 4 ~ 20 mA
|
|
|
|
SENSING RANGE |
: Temperature /-20 ~ +50°C,
Humidity / 0 ~ 100%RH |
|
SENSING ELEMENT |
: Pt 1000Ω / Integrated Circuity |
|
|
SELF-GENERATING CURRENT |
: below 2mA ( 0.02 OHM / 0.05 Deg.) |
|
ACCURACY |
: at 20°C within ±0.3°C,
at 10 ~ 90%RH, ±3%RH |
|
|
|
WIRING |
: 4 Wire |
|
|
|
SENSING TIME |
: 1 minute apprx. |
|
|
AMBIENT TEMPERATURE |
: 1) On Operation : -30 ~ +70°C
2) On Transportation & Storage : -20 ~ +50°C |
|
|
|
AMBIENT HUMIDITY |
: 1) On Operation : below 100%Rh
2) On Transportation & Storage : below 95%Rh |
|
|
 PROTECTION CLASS
|
: IP30 (EN60529) |
|
WEIGHT |
: 0.10 Kg | | |
|
|
|
Engineering
1) In case of control : Preferably install on the wall of building or house and keep away from direct light.
|
1) Installation height ; Preferably install in the middle of house, building or heating area, and to be installed at least 1.5 meter above from the floor.
2) Prohibited Location ; Window, door, Ventilating hole, upper place of heat source, and Veranda or beneath the eaves of roof.
3) To prevent any detecting errors from convection of warm air, cable wire tube of transmitter should be shielded and must not be painted | |
| ROOM TEMP./HUMI. TRANSMITTER(GRTHO-1420N3K) |
|
|
| “ GRTHO” Room Temperature & Humidity Transmitter is intended for control transmitter by sensing relative humidity and temperature of room ventilation and air-handling units. Also can be used interface detect transmitter with sensing value display or auto control system of building. |
|
Pulp/Textile/Food warehouse, greenhouse, computer room, R&D room, Hospital, etc.
Use as measuring Transmitter : In case of optimistic function system . |
|
SUPPLY VOLTAGE : 15~30VDC
OUTPUT SIGNAL : Temperature / NTC 3KΩ, Humidity / 4 ~ 20mA
SENSING RANGE : Temperature / -10 ~ +70°C , Humidity / 0 ~ 100%RH
SENSING ELEMENT : Integrated Circuity, NTC Ω
SELF-GENERATING CURRENT : below 2mA
ACCURACY : at 20°C within ±3%RH ( humidity )
WIRING : 4 Wire
SENSING TIME : within 1 minute apprx.
AMBIENT TEMPERATURE
1) On Operation : -10 ~ +70°C
2) On Transportation & storage : -15 ~ +60°C
AMBIENT HUMIDITY
1) On Operation : below 100%Rh
2) On Transportation & storage : below 95%Rh
PROTECTION CLASS : IP30 (EN60529)
WEIGHT : 0.10 Kg |
|
Engineering
In case of control : Preferably install on the wall of house or building, and keep away from direct light. |
|
1) Installation height : Preferably install in the middle of house, building or heating area.
and to be installed at least 1.5 meter above from the floor.
2) Prohibited Location : Window, door, Ventilation hole, upper place of heat source, and Veranda, or beneath the eaves of roof
3) To prevent any detecting error from convection of warm air, cable wire tube of transmitter should be shielded, and must not be painted | | | |
|
| 查看评论 |
|
|
| 如果您用过本商品，或对本商品有所问题，欢迎发表自己的评论和问题。我们会及时对您提出的问题解答，对您的评论给予鼓励。谢谢对本站的支持。 |
|
|
|
1.根据您的需要产品,请选定型号;
2.与我司销售人员或技术人员确认您的产品的功能,参数.
3.根据产品名称,产品型号签订购销合同
4.汇款后将汇款底联和合同;收货人地址;开票信息;发货方式传真
直线传真:0760-88306579
分机传真：0760-88886370 88886371 88886372 88886373转807分机
上海办事处传真(FAX): 15382730581 |
| 售后服务热线：0760-0760-88886370 88886371 88886372 88886373-805 806 803分机
移动电话:15382730581 15377871867
公司直线传真：0760-88306579
公司分机传真：0760-88886370 88886371 88886372 88886373转807分机
联系电话(TEL): 15382730581 15377871867
邮政编码: 528400
公司邮箱：459382380@qq.com
客服QQ:459382380 和 568843411 |
|
